Let There Be Light!

Recessed lighting has been installed as well as four new electrical circuits. Dedicated 15 amp circuits will have no more than three games per circuit. Outlets were added near the ceiling for the black lights and I added another outlet in the original arcade room for more black light!

Starting Construction

The tear out is now complete. I feel like I removed over 1,000 finish nails from the ceiling! The 'outside wall' insulation is in place. I added a new electrical circuit with two outlets on that wall. Studs are going up as well. Progress is very slow and I do a little bit here and there when I have a free hour to spare.

Before

The plan for the second arcade room is finally beginning to take place. After a massive clean out effort I'm left with the following space. The plywood ceiling needs to go along with the dried out insulation above it. I also need to redo the electrical to allow for additional outlets as well as recessed lighting. The plan is to match the current arcade room with similar construction in this one.